Tuesday, January 29, 2013

Sd.Kfz.261 - Construction I.

In yesterday's post, I neglected to point out the marking options for this kit. Two are illustrated in the instructions: one from an unidentified unit and one from the 2nd Panzer Division, both 1941, and both in panzer grey. The 2nd Pz. Div. vehicle has the "do it yourself" registration numbers where a blank white decal is included along with individual black numbers so you can theoretically assign any number. In this scale, no thanks!

On to construction. Steps 1 and 2 cover the suspension and under-carriage and the attachment of various components to the lower hull. Step 3 covers the mesh "turret", the attachment of items to the upper hull, and the joining of the upper and lower halves. Four indentations need to be filled with putty as this upper hull molding was used for one of the prior versions of this armored car kit.

At this point, I have not attached the mufflers or rear tow hooks and the wheels/tires have been left off for ease of painting. A shot of the underside:


And a shot of the left side. Note the filled indentations used for a previous kit and the heaviness of the mesh in the turret. The equipment has not been added to the rear fenders and the front fenders are added in a later step.

Monday, January 28, 2013

A Small Diversion


Before diving back into my larger projects, I thought that I'd tackle Dragon's recent 72nd scale kit, the Sd.Kfz.261 Kleiner Panzerfunkwagen.

Following the 221, 222, and 223, the 260 and 261 were the fourth and fifth types of armored cars built on the "standard chassis for heavy passenger cars." They had four-wheel drive and armor designed to protect against AP bullets. The screens on top were intended to keep out hand grenades.

The 260 and 261 had no mounted armament. Instead, they were outfitted with long-range radio sets. The 260's radio sets operated in the same frequency band as those used in aircraft. The 261's were high-powered radio sets used for long-range communication with other headquarters.

A total of 483 Sd.Kfz.260s and 261s were completed between April 1941 and April 1943.

The kit itself is molded in Dragon's usual grey styrene. This kit only includes one vehicle whereas Dragon's previous offerings in this series included two. Given that, I expected something special in the kit . . . perhaps some nice PE or added details. Not only is there no PE, but the screens are rather heavily molded in plastic. I guess Dragon figured that since nothing could be seen through the screens that it wasn't necessary to include them in PE. Oh, well. From what I can tell, the kit does include new front fenders and has what appears to be a rather nice mast antenna. All in all, the molding appears to be finely done with little to no flash.

To give you some idea as to the size of this vehicle, here's a photo of both the lower and upper hull with a U.S. quarter:


On to construction!

Thursday, January 10, 2013

Renault UE: Construction


The holidays are over, so I guess it's time to play catch-up with posting the progress on some of my projects.

First up is the Renault UE that I built while at the beach in September. It's a 2007 Tamiya kit produced in 1/35th scale. Injection-molded in dark green styrene, it provides the option for building one of three variants: Series 2, 3, or 4. All are marked as "Unit Unknown, France, 1940." Parts are included for the UE itself as well as the towed, tracked trailer. Tracks are link and length and it truly is a "diorama in a box" as it includes four figures (two interior crew and two standing) as well as a sprue containing barrels, boxes, tarps, and other equipment with which to fill the rear cargo bin and trailer.

The first three steps cover construction of the hull and are straightforward. As one would expect from Tamiya, fit is excellent, even for a five-year-old kit. Following are two pictures of the hull at this point:



Steps 4-7 cover construction of the wheels, suspension, drive sprockets and the attachment of the tracks. This was my first real experience with link and length tracks of this size (small!) and things went without a hitch. Tamiya  has captured the track sag on both the UE and the trailer very well. Here's a picture of the unassembled wheels and suspension:


 Steps 8-11 cover the addition of various hull parts and the hatches. It's important to pay attention to the instructions at this point as it is here that the choice of attachments will determine which of the three versions you end up with. I left the hatches unglued at this point so that I could paint and insert the crew figures at a later time. The only thing extra I needed to do here was drill out the exhaust pipe.

Step 12-13 detail the construction and attachment of the cargo deck. Two pictures showing the completed UE:



Last up was the construction of the trailer, covered in Steps 15-17. Link and length tracks are again used and again went together with a minimum of fuss:




And here's a photo of the complete build at this point:


All that's left is to choose the cargo, paint and weather the UE and trailer, build and paint the figures, and decide on a setting and base for the display.

Friday, November 2, 2012

Renault UE: The Real Deal


As the French army underwent mechanization in the 1920s, the need arose for a small, tracked armored vehicle capable of transporting supplies and weapons to the front lines and towing light artillery. In October 1930, Renault's armored carrier UE was chosen by the French army from several competing designs and production of the first 60 operational vehicles was completed by September 1932.

At 2.8m long, 1.74m wide, and 2.6 tons fully loaded, it was a sturdy, compact design that featured a riveted joint hull construction and a reliable suspension with garter beams supporting the road wheels. The two-member driver/navigator crew was housed in a central compartment, but since their heads protruded from the chassis, special domed-shaped hatches were mounted to augment the carrier's 9mm armor and protect against small-arms fire and shrapnel. A 38hp gasoline engine enabled a road speed of 30km/hr, while over 1 ton of cargo could be carried on the tiltable rear deck and towed trailer. Approximately 4,900 armored carrier UEs were produced until June 1940, including the UE2 variant which featured 4-speed transmission instead of 3-speed, and tow shackles in place of the pig-tailed hooks.

When France capitulated to Germany in June 1940, approximately 3,000 captured armored carrier UEs were pressed into service with German forces, which used them as transports, artillery and aircraft towing vehicles, and as modified self-propelled guns.

--Source: Tamiya

Beach Build Sept. 2012: Renault Armored Carrier UE


Before heading to the beach, I rummaged through my stash looking for a kit that I could conceivably complete during the week, that would lend itself to varying modeling times, and that would require a minimum of tools. Ideally, I would be able to return home with construction completed and could proceed straight to painting and finishing. The kit I decided on was Tamiya's 1/35th scale French Armored Carrier UE.

As soon as we checked into the house I began scouting for a suitable workspace. I immediately spied an out-of-the-way table with a view of the beach and not far from the fridge!

Projects and More Projects

It's been some time since I posted, but not a whole lot has been built during that time. I've begun several new projects to add to my "in progress" list so I thought it might be good to summarize where I stand on all of them.

Stug III (F1) and Finnish Army Stug III Ausf. G (New)
These are both in the initial stages of construction. I'm building them for an online build for the "Tanks and Things" forum. I'll get separate postings done for each soon.

Marder II (New)
I saw this kit at HobbyTown and bought in on a whim. Ordered an after-market barrel and other goodies for it and dove right in. I'm currently constructing the gun. Post coming soon.

French Armored Carrier UE (New)
Rescued this kit from my stash and took it to the beach with me back in September. I completed construction on it and its trailer at the beach and it's now ready for the paint booth. I'll post photos soon.

T-34/76 Model 1941 (35th Scale)
I'm noodling over the attachment of the ice cleats to the fenders--how many groups to attach and which ones. These involve fiddly PE straps and buckles. Also, I'm still worrying over the square fuel tanks for the rear deck.

Steyr 1500A/01
The wiring of all the radios and electrical gear is proving to be quite a hurdle to get over. 'Nuff said about that.

Kfz.13
I'm back to the suspension with all it's PE and small plastic bits. Then all that's left is setting up the MG and adding details.

I think that's it . . . certainly enough to carry me through the winter. Now to get to those four new posts and photos :)

Thursday, September 6, 2012

Kfz.13 - Body Work


It's beginning to look a lot like a Kfz.13!

Since my last post, I've attached the "tub" to the frame along with the front section, armored grill, and the rear fenders.

Next, it's back to the frame, suspension, and the addition of some "goodies" to the tub.